New Items

Product Details:

Features

• GDM-452/357/350B
• 4 1/2 Digits 19999 counts (GDM-452), 3 1/2 Digits 1999 counts (GDM-357/350B)
• Manual Ranging, Continuity Beeper/Diode Test, Data Hold
• hFE Test (GDM-350B)
• Temperature Measurement (GDM-357/350B)
• Capacitance (GDM-452/357)
• Frequency Measurement (GDM-452)
• *GDM-461/397/360/398*
• 22000 Counts Auto/Manual Ranging (GDM-461)
• 4000 Counts Auto/Manual Ranging (GDM-397/398)
• 6000 Counts Auto/Manual Ranging (GDM-360)
• Capacitance, Frequency Measurement
• Continuity Beeper/Diode Test
• High Energy Fuse for 10A Range
• Data Hold/Relative Mode
• True RMS (GDM-461/360)
• RS232C (GDM-461/397/360)

Product Details:

Features

• 50000 Counts Display
• Multi-Function : ACV, DCV, ACA, DCA, R, C, Hz, Continuity Beeper, Diode, Test, Max/Min, REL, Hold, dBm
• Dual Display Indicate ACV and Hz,or DCV(ACV) and dBm
• Manual or Auto Ranging
• 0.03% DCV Accuracy
• ACV Measuring Frequency Up to 50kHz
• AC True RMS or AC + DC True RMS

Product Details:

Features

• GDM-8255A 199,999 Counts Display
• VFD Two Colors Display
• 0.012% DCV Accuracy
• True RMS (AC, AC+DC)
• 9 Major Measuring Functions and 10 Advanced Measurement Functions
• 2W/4W Resistance Measurement
• High Voltage 1000V and 10A Current Range
• Standard Interface : RS-232C, USB Device, Digital I/O
• Free PC Software (DMM-VIEWER), LabVIEW Driver
• Optional: 16+2 Channels Scanner Card

Product Details:

Features

• 120,000 counts, VFD display
• Dual measurement/Dual display
• The basic precision of DC voltage: 0.012%
• Selectable measurement speeds, the maximum: 320 Readings/s
• True RMS (AC???AC+DC) measurements
• Auto/manual selection
• 12 different measurement functions: AC/DC voltage, AC/DC current, AC+DC voltage/current, 2W/4W resistance, continuity beeper, diode test, capacitance, frequency, temperature
• Many auxiliary functions: Max./Min., REL/REL#, Compare, Hold, dB, dBm, Math (MX+B, %, 1/X)
• Digital I/O provides dual mode (standard Compare and User definition modes)
• Standard RS-232C and USB device interface (support USBCDC and USBTMC modes)

Product Details:

Features

• 6 1/2 Digit Display???1,200,000 counts
• DCV Basic Accuracy???0.0035%
• Dual Measurements to perform two selected measurements simultaneously
• Bright Vacuum Fluorescent Display (VFD)
• Provide AC+DC Voltage or Current Measurement Functions
• 11 Measurement Functions & 10 Math Functions
• High Resolution: Up to 100pA with DCI and 1nA with ACI Measurements
• Temperature Measurement (RTD & Thermocouple) from -200°C ~ +1820°C
• High Transmission Speed: Up to 2,400 readings/sec through the USB
• Standard Interfaces : USB, RS232C, Digital I/O
• Optional Interfaces : GPIB or LAN
• Optional Scanner Card : GDM-SC1A (V ch x16, I ch x2)
• Free PC software : DMM Excel ADD-INS , LabVIEW Driver

Product Details:

Features

• 50,000 counts, VFD display
• Dual measurement/Dual display
• Selectable measurement speeds, the maximum: 40 Readings/s for DCV
• The basic precision of DC voltage: 0.02%
• Auto/manual Ranging
• True RMS (AC???AC+DC) measurements
• 11 different measurement functions
• Max./Min., REL, MX+B, 1/X, Ref%, Compare, Hold, dB, dBm
• Standard USB device interface to connect with a computer
• Temperature measurement function (GDM-8342 only)
• USB storage for Data collection (GDM-8342 only)

Product Details:

Features

• GSB-01 (8CH High Voltage Scanner Box)
• GSB-02 (6CH High Voltage and 2CH Ground Bond Scanner Box)
• Front & rear input connector design is suitable for the GPT-9800/9900/9900A series
• A maximum of 4 scanner boxes (32 CH) can be connected to one GPT-9800/9900/9900A series
• High-intensity LED for Channel, Status & Judgment indications

Product Details:

Features

• 6 1/2 Digit Display:1,200,000 Counts
• 4.3 TFT Craphic LCD
• DCV Basic Accuracy:0.0035%(GDM-9061)/0.0075%(GDM-9060)
• 12 Measurement Functions: DCV, ACV, DCI, ACI, 2-wire and 4-wire Resistance, Frequency, Period, Diode, Continuity, Temperature and Capacitance
• Sampling Rate up to 10k SPS (GDM-9061)
• Dual Measurement Function to Providing Two Selected Measurement Simultaneously
• Offer Graphical Capabilities lncluding Histogram, Bar Meter and Trend
• Temperature Measurement Support RTD, Thermistor as Well as Thermocouple
• Standard Interfaces: USB Host/Device, RS-232C, LAN, Digital I/O
• Optional Interface: GPIB

Product Details:

Features

• 6 1/2 Digit Display:1,200,000 Counts
• 4.3 TFT Craphic LCD
• DCV Basic Accuracy:0.0035%(GDM-9061)/0.0075%(GDM-9060)
• 12 Measurement Functions: DCV, ACV, DCI, ACI, 2-wire and 4-wire Resistance, Frequency, Period, Diode, Continuity, Temperature and Capacitance
• Sampling Rate up to 10k SPS (GDM-9061)
• Dual Measurement Function to Providing Two Selected Measurement Simultaneously
• Offer Graphical Capabilities lncluding Histogram, Bar Meter and Trend
• Temperature Measurement Support RTD, Thermistor as Well as Thermocouple
• Standard Interfaces: USB Host/Device, RS-232C, LAN, Digital I/O
• Optional Interface: GPIB

Product Details:

Features

• 6 1/2 Digit Display???1,200,000 counts
• DCV Basic Accuracy???0.0035%
• Dual Measurements to perform two selected measurements simultaneously
• Bright Vacuum Fluorescent Display (VFD)
• Provide AC+DC Voltage or Current Measurement Functions
• 11 Measurement Functions & 10 Math Functions
• High Resolution: Up to 100pA with DCI and 1nA with ACI Measurements
• Temperature Measurement (RTD & Thermocouple) from -200°C ~ +1820°C
• High Transmission Speed: Up to 2,400 readings/sec through the USB
• Standard Interfaces : USB, RS232C, Digital I/O
• Optional Interfaces : GPIB or LAN
• Optional Scanner Card : GDM-SC1A (V ch x16, I ch x2)
• Free PC software : DMM Excel ADD-INS , LabVIEW Driver

Product Details:

Features

• LCD display
• Output on/off control
• 3-step fan speed control
• Voltage/current/power settings
• Key lock to avoid operation error
• OVL / OCL /OPL /OTP protection
• Normal, +% & -% output operation key
• High efficiency and high power density
• Standard interface???RS-232C
• Optional European type jack terminal

Product Details:

Features

• Wide input voltage range and high power factor (P.F)
• high efficiency and high power density
• Constant voltage and constant current operation
• Over voltage over current and over temperature protection
• Low ripple and noise
• Output on/off control
• Self-test and software calibration
• LabView driver
• Standard interface : RS-232C
• Optional interface : GPIB ( IEEE-488.2 )

Product Details:

Features

• 20,000/2,000 Counts Dual Display
• Test Frequency : 100/120Hz/1/10/100kHz
• Auto LCR Mode for DUT Measuring
• 0.2% Basic Accuracy
• Measurement Parameter : L,C,R,D,Q,ESR,θ,DCR
• Parallel/Series Testing Mode
• Sorting Mode for Quality Control
• 2Wire or 5Wire Measurement Available
• Data Hold and Zero Mode Supported
• Max/Min
• Auto Range, Auto Backlit
• Low Battery Indication
• Auto Power off
• Data Collection/AC power operation

Product Details:

Features

• Wide Test Frequency 20Hz ~ 10/5/1MHz
• 0.1% Basic Accuracy & 6 Digits Measurement Resolution
• Large LCD Display with Intuitive Interface
• Full Measuring Functions with DUT V/I Monitor
• PASS/FAIL Function ( abs, % or delta) with Judgment Alarm
• DC Resistance Measurement
• Multiple Step Mode
• Standard RS-232C/GPIB Interface
• Optional DC Bias box

Product Details:

Features

• Output Rating: AC 0 – 350 Vrms, DC 0 - ± 500 V
• Output Frequency up to 999.9 Hz
• DC Output (100% of Rated Power)
• Measurement Items: Vrms, Vavg, Vpeak, Irms, IpkH, Iavg, Ipeak, P, S, Q, PF, CF
• Voltage and Current Harmonic Analysis(THDv, THDi)
• Remote Sensing Capability
• OVP, OCP, OPP, OTP, AC Fail Detection and Fan Fail Alarm.
• Support Arbitrary Waveform Function
• Output Capacity: 500VA/ 1000VA
• Customized Phase Angle for Output On/Off
• Sequence and Simulation Function(up to 10 sets)
• Interface: USB, LAN(std.); RS-232+GPIB(opt.)
• Built-in External Control I/O and External Signal Input
• Built-in Output Relay Control
• Memory Function (up to 10 sets)
• Built-in Web Server

Product Details:

Features

• Wide Test Frequency 10Hz ~ 30MHz/20MHz/10MHz/5MHz
• 7” LCD color Display
• 0.08% Basic Accuracy
• Displaying Four Measurement results simultaneously from 17 selectable measurement parameters freely
• 15 steps List Measurement
• Two Curves Sweep Mode
• Internal DC Bias Voltage ±12V
• USB Storage available
• ALC function available
• Standard Interfaces : RS-232C, USB host/device, LAN, GPIB and Handler
• Universal power input

Product Details:

Features

• 3.5” color LCD
• 5 models (10Hz~2kHz/20kHz/100kHz/200kHz/300kHz)
• Consecutive test frequency
• Basic accuracy : 0.05%
• Measuring speed up to 25ms (max.)
• Full frequency range or spot OPEN/SHORT
• 16 major/secondary parameter measurement combinations and two additional monitoring parameters(maximum four different parameters can be shown simultaneously)
• DCR measurement and internal D.C. bias voltage (±2.5V)
• PASS/FAIL judgment
• Auto Level Control (ALC) function
• BIN function provides 9BIN and 1AUX, totally 10 BIN
• 10 steps listed tests to select different frequency, voltage and current criteria
• Standard interface : RS-232C, Handler and USB Host / Device
• Compact size, ideal for automatic equipment (2U,1/2 RACK)

Product Details:

Features

• LCD display and menu-typed functionality selection
• Support front panel output terminals (Max.30A) and rear panel output terminals (Rating current output)
• Bleeder circuit control
• I/V Control function
• Sequence function
• Power on Configuration
• Internal Sense Control( Disable/ front panel/ rear panel)
• Voltage trigger function
• Output delay function
• OCP Control function
• Interface: USB Host, LAN, option: GPIB (PSB-105)

Product Details:

Features

• 0.1Hz to 5/12/25 MHz with in 0.1Hz Resolution
• Sine, Square, Triangular, Noise and Arbitrary Waveform
• 20MSa/s Sampling Rate, 10 bit Vertical Resolution and 4k Point Memory for Arbitrary Waveform
• 1% ~ 99% adjustable duty cycle for Square Waveform
• Waveform Parameter Setting Through Numeric Keypad Entry & Knob Selection
• Amplitude, DC Offset and Other Key Setting Information Shown on the 3.5” LCD Screen Simultaneously
• AM/FM/FSK Modulation, Sweep, and Frequency Counter Functions (AFG-2100 only)
• USB Device Interface for Remote Control and Waveform Editing
• PC Arbitrary Waveform Editing Software

Features

• Using the TMS320F28335 floating point DSP of TI controller
• Provide five experimentation
• Provide PSIM simulation andexperimental files
• Provide PPT file for reference
• Provide hardware schematic and experimental guide b

Product Details:

Features

• Wide Frequency Ranges From 1μHz to 25MHz (sine/square wave)
• 1 μHz Resolution in Full Range
• Built-in Standard 120MSa/s, 10bit, 4k Points Arbitrary Waveform for Both Channels
• True Dual-Channel Output, CH2 Provides the Same Characteristics as CH1
• Couple, Tracking, Phase Operations of Dual Channel are Supported
• 1% ~ 99% Adjustable Duty Cycle for Square Waveform
• High Resolution and Colored TFT LCD with Friendly User Interface
• Multiple Editing methods to Edit Arbitrary Waveform Easily
• Built-in Standard AM/FM/PM/FSK/SUM/Sweep/Burst and Frequency Counter
• USB Host/Device Interface for Remote Control and Waveform Editing

Features

• 200VA AC Test Capacity
• 240x64 Ice Blue Dot matrix LCD
• Manual/Auto Mode
• Function Key for quick selecting
• High intensity flash for Caution & Status indication
• Safety INTERLOCK function
• Zero Crossing Turn-on Operation
• Controllable Ramp-up Time
• True RMS Current Measurement
• High resolution: 1uA for measuring current, 2V for setting voltage
• PWM amplifier to enhance the power efficiency and reliable testing
• Max. 100 memory block for test condition (step) setting. And each step can be named individually.
• Remote terminal on the front panel for “start” and “stop” control
• Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

Product Details:

Features

• Touch Panel with Color LCD Display
• 9 Different Measurement Network to Simulate the Resistance of Human Body
• 8 Different Types of Leakage current
• Various Leakage Current Measuring Mode???DC/AC/AC+DC/AC Peak
• Upper & Lower Limitation for PASS/FAIL Judgment
• Meter Mode with SELV/CONV Function
• 50 Preset Test Conditions Conform to IEC 60990; 30 Sets Memories for Customer Defined
• Various Standard Interfaces???RS232/GPIB/USB Host & Device/EXT I/O

Product Details:

Features

• 100VA AC Test Capacity
• 240x48 Ice Blue Dot matrix LCD
• Auto W-I or I-W Mode
• ARC Detection
• True RMS Current Measurement
• Zero Crossing Turn-on Operation
• Safety INTERLOCK function
• PWM amplifier to enhance the power efficiency and reliable testing
• Automatically Switching Input Source for Universal Input Voltage
• Interface : Remote terminal and Signal I/O

Product Details:

Features

• 500VA AC Test Capacity
• 240x64 Ice Blue Dot matrix LCD
• Sweep Function for DUT characteristic analysis
• Insulation resistance measurement up to 50GΩ(GPT-9903A/9904)
• Manual/Auto Mode
• Function Key for quick selection
• High intensity flash for caution & Status indication
• Safety INTERLOCK function
• Zero Crossing Turn-on Operation
• Controllable Ramp-up Time
• True RMS Current Measurement
• High resolution: 1uA for measuring current, 2V for setting voltage
• PWM amplifier to enhance the power efficiency and reliable testing
• Max. 100 memory block for test condition (step) setting. And each step can be named individually.
• Remote terminal on the front panel for “start” and “stop” control
• Rear panel output available
• Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

Features

• Using the TMS320F28335 floating point DSP of TI controller
• Provide five experimentation
• Provide PSIM simulation and experimental files
• Provide PPT file for reference
• Provide hardware schematic and experimental guide book

Features

• Using the TMS320F28335 floating point DSP of TI controller
• Provide five experimentation
• Provide PSIM simulation and experimental files
• Provide PPT file for reference
• Provide hardware schematic and experimental guide book

Product Details:

Features

• Provide Analysis, Design, Simulation and Implementation Verification for Power Electronics
• Allow Students With no DSP Firmware Programming Capability to Easily Complete Programming so as to Swiftly Proceed to Digital Control Domain
• Provide Comprehensive After-sales Maintenance Services
• Provide a Complete Experiment Kit List
• Provide Circuit Diagram Files for Each Course Kit
• Provide DSP Hardware Planning, Setting and Program Burning Method
• Provide Detailed Principle and Design of Experiment Circuits

Product Details:

Features

• Touch Panel with Color LCD Display
• 9 Different Measurement Network to Simulate the Resistance of Human Body
• 8 Different Types of Leakage current
• Various Leakage Current Measuring Mode???DC/AC/AC+DC/AC Peak
• Upper & Lower Limitation for PASS/FAIL Judgment
• Meter Mode with SELV/CONV Function
• 50 Preset Test Conditions Conform to IEC 60990; 30 Sets Memories for Customer Defined
• Various Standard Interfaces???RS232/GPIB/USB Host & Device/EXT I/O

Features

• AC 40A Ground Bond Tester
• Measuring Resistance from 1mΩ~650mΩ
• Connect with the GPT-9800/9900 series to become a multifunctional test or simultaneous test system
• 240x64 Ice Blue Dot Matrix LCD
• Function Key for quick selecting
• High intensity flash for Caution & Status indication
• PWM switching amplifier to enhance the power efficiency and reliable testing
• Max. 100 memory block for test condition setting.
• Remote terminal on the front panel for “start” and “stop” remote active
• Interface : USB device, Signal I/O and GPIB (optional)

Product Details:

Features

• 500VA AC Test Capacity
• 240x64 Ice Blue Dot matrix LCD
• Sweep Function for DUT characteristic analysis
• Insulation resistance measurement up to 50GΩ(GPT-9903A/9904)
• Manual/Auto Mode
• Function Key for quick selection
• High intensity flash for caution & Status indication
• Safety INTERLOCK function
• Zero Crossing Turn-on Operation
• Controllable Ramp-up Time
• True RMS Current Measurement
• High resolution: 1uA for measuring current, 2V for setting voltage
• PWM amplifier to enhance the power efficiency and reliable testing
• Max. 100 memory block for test condition (step) setting. And each step can be named individually.
• Remote terminal on the front panel for “start” and “stop” control
• Rear panel output available
• Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

Product Details:

Features

• 200VA AC Test Capacity
• Comply with IEC 61010-2-034
• 7”TFT LCD
• Manual / Auto Mode
• True RMS Current Measurement
• Zero Crossing Turn-on Operation
• Controllable Ramp-up & Ramp-down Time
• Capacitive Load Testing Capability up to 47μF
• Statistics Function
• Sweep Function for DUT Characteristic Analysis
• USB Storage available
• Rear panel output available
• Interface : RS-232C, USB host/device, Signal I/O and GPIB (optional)
• Universal power input

Features

• AC 40A Ground Bond Tester
• Measuring Resistance from 1mΩ~650mΩ
• Connect with the GPT-9800/9900 series to become a multifunctional test or simultaneous test system
• 240x64 Ice Blue Dot Matrix LCD
• Function Key for quick selecting
• High intensity flash for Caution & Status indication
• PWM switching amplifier to enhance the power efficiency and reliable testing
• Max. 100 memory block for test condition setting.
• Remote terminal on the front panel for “start” and “stop” remote active
• Interface : USB device, Signal I/O and GPIB (optional)

The Fluke 3540 FC monitors equipment for changes in key electrical variables. Current, voltage, frequency, and energy consumption fluctuate when machinery experiences excess load. Screen assets for performance, premature wear, or power cleanliness using the non-invasive 3450 FC.

• Portable device offers scalable, remote power monitoring solution
• View power measurements from a safe distance
• Wirelessly collect real-time power values
• Make data-driven decisions

The HL-200 EX is a hands-free headlamp. This headlamp securely grips your hardhat, leaving you hands-free for whatever your job demands. The light features an adjustable angle, as well as high and low light modes.

You’ve always trusted Fluke for the best in intrinsically safe measurement tools. Now, Fluke expands this line to include safe, convenient and rugged flashlights to help you see the work you’re doing, wherever you may be.

The FL-45 EX is convenient and compact. This pocket-sized light is great for lighting in small, crowded spaces or wherever you need it.

• MATLAB® and LabVIEW® software compatibility allows users to integrate infrared data, images and videos to support R&D analysis
• 640 x 480 resolution
• See the details you need with optional smart lenses: 2x and 4x telephoto, wide angle and macro lenses
• Optimize images, generate customizable reports and export images to the format of your choice with SmartView® desktop software
• Wirelessly connect your camera to the Fluke Connect® system to easily share and edit images

Features

• Using the TMS320F28335 floating point DSP of TI controller
• Motor sets use EMCAC30604PS of Delta
• Provide six experimentation
• Provide PSIM simulation and experimental files
• Provide PPT file for reference
• Provide hardware schematic and experimental guide book